Fiberglass
tables are available in multiple colors (see chart). They have
seamless one-piece molded fiberglass tops that are mirror smooth, easy
to clean and impervious to most spotting fluids. The work surfaces are
at the preferred 34” height and have 3” high stop ledges at the ends and
back to greatly increase the usable area. The standard color for all
metal parts is black.
Dimensions
Wt.
Dimensions
Wt.
TF-244
24”D X 48”W X 34”H
64 lbs
TF-304
30”D X 48”W X 34”H
67 lbs
TF-245
24”D X 60”W X 34”H
70 lbs
TF-305
30”D X 60”W X 34”H
77 lbs
TF-246
24”D X 72”W X 34”H
75 lbs
TF-306
30”D X 72”W X 34”H
87 lbs
Fiberglass Table
Same as the above table but
with 1 1/2” square tubular steel legs secured to steel cross
frame bracing the table top.
Dimensions
Wt.
Dimensions
Wt.
TFD-244
24”D X 48”W X 34”H
73 lbs
TFD-304
30”D X 48”W X 34”H
76 lbs
TFD-245
24”D X 60”W X 34”H
81 lbs
TFD-305
30”D X 60”W X 34”H
84 lbs
TFD-246
24”D X 72”W X 34”H
89 lbs
TFD-306
30”D X 72”W X 34”H
99 lbs
UPPER SHELF FOR
FIBERGLASS TABLES
Any
fiberglass table above can be ordered with a matching upper shelf.
Factory installed
Dimensions
Wt.
Dimensions
Wt.
TF48
12”D X 48”W X 16”H
22 lbs
TF60
12”D X 60”W X 16”H
22 lbs
TF72
12”D X 72”W X 16”H
22 lbs
TR-2F
Factory
Installed Clothes Rack
(Must be ordered with table)
FULL LENGTH HANGING RACK
CAN FIT ON ANY NEW OR EXISTING TABLE WITH THE TFD STYLE
LEGS. PROVIDES AMPLE SPACE ON EACH END FOR LONG GARMENTS
WHILE ALLOWING COMPLETE USE OF THE OVER TABLE AREA FOR
SHORTER GARMENTS. MADE OF TUBULAR STEEL AND BOLTS
SECURELY TO THE TABLES LEGS. BOLT DOWN IS REQUIRED.
TR-4 RACK FOR TDF-244 OR TDF-304
TR-5 RACK FOR TDF-245 OR TDF-305
TR-6 RACK FOR TDF-246 OR TDF-306
RCC-32 TRASH CAN COVER
FIBERGLASS TRASH CAN COVERS PROVIDE A COLORFUL AND
TASTEFUL SOLUTION TO AN OFTEN UNSIGHTLY PROBLEM. THE
COVERS ARE DESIGNED TO FIT OVER MOST STANDARD PLASTIC OR
METAL TRASH CONTAINERS UP TO 35 GALLON CAPACITY. THEY
ARE RUGGED YET LIGHT ENOUGH TO BE EASILY LIFTED WHEN
EMPTING THE CONTAINER.
TRC-32
BUILT-IN TRASH CONTAINER
SPACE SAVING TRASH CONTAINERS CAN BE FACTORY INSTALLED
UNDER ALL “TFD” STYLE FOLDING
TABLES ONLY. THE CONTAINERS TITL OUT AT THE TOP FOR CONVENIENT USE
AND THEN SELF CLOSE TO HIDE THE CLUTTER. THEY ARE
DESIGNED TO USE STANDARD 32 GALLON THASH BAGS AND TILT
OUT FOR EASY EMPTING. THEY ARE AVAILABLE IN STANDARD
COLORS AND CAN BE USED ON ONE OR BOTH SIDES.
Laminate
tables
are available in a wide variety of colors and sizes. They have scratch
and wear resistant high-pressure laminate surfaces fused directly to
strong moisture resistant fiberglass bodies. The standard color for all
metal parts is black.
Dimensions
Wt.
Dimensions
Wt.
TFL-2448
24”D X 48”W X 34”H
61 lbs
TFL-3048
30”D X 48”W X 34”H
63 lbs
TFL-2460
24”D X 60”W X 34”H
70 lbs
TFL-3060
30”D X 60”W X 34”H
72 lbs
TFL-2472
24”D X 72”W X 34”H
78 lbs
TFL-3072
30”D X 72”W X 34”H
89 lbs
ACCESSORIES FOR LAMINATED FOLDING TABLES LISTED ABOVE
NOTE: UPPER SHELF WITH BACK STOP, BACK STOP, AND COLORED LEG
PANELS ARE NOT SOLD SEPARATELY. THEY ARE FACTORY INSTALLED ON
LAMINATED TABLES SOLD ABOVE.
All tables can be ordered with matching upper shelf installed,
providing additional folding space.
The shelves are 12” deep and 16” high with black tubular steel
supports. See note above.
All tables can be ordered with back stop installed to enhance
it's work space.
The rails are 4 inches high and are made of black tubular steel.
See note above.
All tables can be ordered with colored leg panels to match the
table.
See note above.
Standard shipping is added
to every purchase and applies to deliveries to commercial addresses.
For deliveries to residential addresses there are extra charges that
will need to be added after placing your order. If you would like
to find out what these charges are before ordering please call
1-800-374-9274. Otherwise we will send a PayPal invoice payable
before processing the order.
To
contact us:
6304 So. 23rd St
Omaha, NE 68107
Phone: (402) 346-6336
Fax: (402) 330-3014
Email:
joe@aaamidwestlaundry.com